Mounting And Installation; Dimensions / Fastening Dimensions - Stahl EXLUX 6401-Serie Betriebsanleitung

Mounting and installation

EN
7 Mounting and installation
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Malfunction or device damage caused by condensation.
EN
Non-compliance can result in material damage!
EN
• operate the luminaire continuously or periodically over extended periods of time.
• avoid thermal bridges.
EN
EN
EN
7.1

Dimensions / fastening dimensions

EN
Dimensional Drawings (All Dimensions in mm [inch]) - Subject to Modifications
EN
EN
EN
EN
EN
EN
Dimensions Luminaire
L1
1)
L2
2)
L3
b
h1
1)
fixed mounting distance
2)
variable mounting distance
EXLUX 6401 Standard luminaire
12
Linear Luminaire for Fluorescent Lamps
Series EXLUX 6401
Explosion hazard due to incorrect installation of the device!
Non-compliance results in severe or fatal injuries.
• Carry out installation strictly according to the instructions and national
safety and accident prevention regulations to maintain the explosion
protection.
• Select and install the electrical device so that explosion protection is not
affected due to external influences, i.e. pressure conditions, chemical,
mechanical, thermal and electric impact such as vibration, humidity and
corrosion (see IEC/EN 60079-14).
• The device must only be installed by trained qualified personnel who is
familiar with the relevant standards.
17/18 W
700 [27.56]
400 [15.75]
320 ... 480 [12.60 ... 18.90]
184 [7.24]
125 [4.92]
DANGER
NOTICE
15440E00
32/36 W
1310 [51.57]
800 [31.50]
670 ... 930 [26.38 ... 36.61]
184 [7.24]
125 [4.92]
Ätna Zone II
PPW EX 34../..
40/58 W
1610 [63.39]
800 [31.50]
670 ... 930 [26.38 ... 36.61]
184 [7.24]
125 [4.92]
254914 / 640160300040
2017-12-01·BA00·III·en·02