Commissioning - Support; Ip Configuration Via Dhcp Server; Prerequisite; Procedure - TR-Electronic C 115 Serie Gesamt-Bedienungsanleitung

9 Commissioning - Support

9.1 IP configuration via DHCP server

9.1.1 Prerequisite

●
DHCP server utility from Rockwell Automation (free of charge):
●
The program is suitable for the installation on a PC with WINDOWS
system. DHCP server and measuring system must be located in the same
network segment.

9.1.2 Procedure

1. Connect the measuring system with the DHCP server
 Make sure that the measuring system works as DHCP client:
–
–
2. Start the BOOTP/DHCP Server Utility
3. The Network Settings dialog under menu Tools --> Network Settings allows you
to enter the following information for an address relation:
 Subnet Mask: Enter desired subnet mask
 Gateway: Enter desired IP address of the Default Gateway
 Primary DNS, Secondary DNS, Domain Name: not supported
Printed in the Federal Republic of Germany
01/27/2022
–
Program name: BOOTP/DHCP Server Utility
–
Download: http://www.ab.com/networks/bootp.html
–
If the Rockwell control system "Logix" is used, the BOOTP/DHCP server
utility is a component of the control software.
Hardware switches = 0x00
Instance Attribute 3 Configuration Control = 0x0000 0002
--> Default adjustment!
TR-ECE-BA-DGB-0102 v10
®
operating
 TR-Electronic GmbH 2013, All Rights Reserved
Page 167 of 175