Technical Data - WAGNER WoodPerfect W 600 Originalbetriebsanleitung

W 600 WoodPerfect
•
Caution against dangers that can arise from the sprayed substance and observe the
text and information on the containers or the specifications given by the substance
manufacturer.
•
Do not spray any liquid of unknown hazard potential.
•
The device may not be used in workplaces covered by the explosion-protection
regulations.
•
To avoid the hazard of explosion when spraying, provide for effective natural or
artificial ventilation.
•
There must be no sources of ignition such as, for example, open fires, smoke of lit
cigarettes, cigars and tobacco pipes, sparks, glowing wires, hot surfaces, etc. in the
vicinity during spraying.
•
Ensure that no solvent vapors are sucked in by the unit. Do not spray onto the unit!
•
The spray gun is not a toy; children must therefore not be allowed to handle it or play
with it.
•
Before working on the spray gun remove the power plug from the socket.
•
Cover areas that are
example, may transport paint mist over great distances and cause damage.
•
Do not lay the spray gun.
With original WAGNER accessories and spare parts, you have the guarantee that all
safety regulations are fulfilled.
Max. viscosity:
Power source:
Power consumption:
Atomizing output:
Double insulation:
Sound pressure level*:
Sound pressure output*:
Oscillation level:
Air hose length:
Weight:
* Measured in accordance with EN 50144-2-7:2000
1 Air cap
3 Union nut
5 Material volume regulation
7 Air hose
9 Carrying belt
11 Spray gun holder
not to be sprayed. When working keep in mind that wind, for

Technical Data

90 DIN-s
230 V ~
280 W
65 W
81 dB (A); Uncertainty K = 4 dB (A)
94 dB (A); Uncertainty K = 4 dB (A)
< 2.5 m/s²
2.0 m
approx. 1.6 kg
Description (Fig. 1)
2 Nozzle
4 Trigger
6 Spray gun
8 ON/OFF switch
10 Air filter
12 Mains lead
GB
15