TR-Electronic LA Serie Gesamt-Bedienungsanleitung Seite 228

Commissioning - Support
The new entry is indicated in the Relation List. The predefined IP parameters are
assigned to the measuring system with the next DHCP request. The result of this
assignment is registered into the Request History:
6. Store IP parameters into the FLASH about the button Disable BOOTP/DHCP.
–
–
 TR-Electronic GmbH 2014, All Rights Reserved
Page 176 of 183
This command is confirmed with the status report (Disable DHCP)
Command successful, for this reason the configuration is complete.
With Disable BOOTP/DHCP the Instance Attribute 3 Configuration
Control is set to 0x0000 0000 --> after POWER ON the measuring system
executes no DHCP requests.
TR - ELA - BA - DGB - 0023 - 06
Printed in the Federal Republic of Germany
05/04/2018