Hilti PS 85 Bedienungsanleitung Seite 21

the UWB operator shall include the name, address and other pertinent
contact information of the user, the desired geographical area(s) of opera-
tion, and the FCC ID number and other nomenclature of the UWB device.
If the imaging device is intended to be used for mobile applications, the
geographical area(s) of operation may be the state(s) or county(ies) in
which the equipment will be operated. The operator of an imaging system
used for fixed operation shall supply a specific geographical location or
the address at which the equipment will be operated. This material shall
be submitted to Frequency Coordination Branch, OET, Federal Commu-
nications Commission, at the address of the FCC's main office indicated
in 47 CFR 0.401(a), ATTN: UWB Coordination.
3. The manufacturers, or their authorized sales agents, must inform pur-
chasers and users of their systems of the requirement to undertake
detailed coordination of operational areas with the FCC prior to the equip-
ment being operated.
4. Users of authorized, coordinated UWB systems may transfer them to other
qualified users and to different locations upon coordination of change of
ownership or location to the FCC and coordination with existing authorized
operations.
5. The FCC/NTIA coordination report shall identify those geographical areas
within which the operation of an imaging system requires additional
coordination or within which the operation of an imaging system is
prohibited. If additional coordination is required for operation within
specific geographical areas, a local coordination contact will be provided.
Except for operation within these designated areas, once the information
requested on the UWB imaging system is submitted to the FCC no
additional coordination with the FCC is required provided the reported
areas of operation do not change. If the area of operation changes,
updated information shall be submitted to the FCC following the procedure
in paragraph 2) of this section.
6. The coordination of routine UWB operations shall not take longer than
15 business days from the receipt of the coordination request by NTIA.
Special temporary operations may be handled with an expedited turn-
around time when circumstances warrant. The operation of UWB systems
in emergency situations involving the safety of life or property may occur
without coordination provided a notification procedure, similar to that
contained in § 2.405(a) through (e) of this chapter, is followed by the UWB
equipment user.
Responsible party
Hilti, Inc.
7250 Dallas Parkway, Suite 1000
US-Plano, TX 75024
www.hilti.com
*2327817*
2327817 English 17