Knowing Your »Design Mincer Pro M; Important Safeguards - Gastroback DESIGN FLEISCHWOLF PRO M Bedienungsanleitung

KNOWING YOUR »DESIGN MINCER PRO M«
A Pusher – for pressing the food down into the feed
tube.
B Tray – place the prepared food here.
C Cutter housing / Outlet
D Reversal button (REVERSE) – reverses the rotary
motion of the worm shaft to release food stucked
in the mincer.
d power switch
E ON/OFF button – for switching off the motor and
switching on in forward (ordinary) direction
F Release button
G Motor housing
Gear hole – this is, where you assemble the cutter
housing.
K Worm shaft – moves the food within the cutter
housing
N Screw ring
32
Tools
For Mincing and Mixing:
L Cutter blade
M Coarse grinding disc
J Medium grinding disc
I Fine grinding disc
For Making Sausages:
O Separator disc
P Sausage horn
For Making Kebbe:
Q Cone
R Plastic finger
For Cookies:
• Cookie maker
• Former

IMPORTANT SAFEGUARDS

Carefully read all instructions before operating this appliance, and
save for further reference. Do not attempt to use this appliance for
any other than the intended use, described in these instructions. Any other
use, especially misuse, can cause severe injuries or damage by electric
shock, moving parts, heat or fire.
Any operation, repair and technical maintenance of the appliance or any
part of it other than described in these instructions may only be performed at
an authorised service centre. Please contact your vendor.
• Appliance can be used by persons with reduced physical, sensory or men-
tal capabilities or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe way and
if they understand the hazards involved.
• This appliance is for household use only, and NOT intended for use in
moving vehicles. Do not operate or store the appliance in humid or wet areas
or outdoors. Any use of accessories, attachments or spare parts not recom-
mended by the manufacturer may result in damage and/or injuries to persons.
• Check the entire appliance regularly for proper operation—especially the
power cord. Do not operate the appliance, when the appliance or any part of it
is likely to be damaged, to avoid risk of fire, electric shock or any other damage
and/or injuries to persons. The appliance is likely to be damaged if the appli-
ance has been subject to inadmissible strain (e.g. overheating, mechanical or
electric shock), or if there are any cracks, excessively frayed or melted parts, or
distortions, or if the appliance is not working properly. In this case, immediate-
ly unplug the appliance and return the entire appliance (including all parts and
accessories) to an authorised service centre for examination and repair.
• During operation keep the appliance in an appropriate distance of at least
10 cm on each side and 50 cm in front and above to furniture, walls, boards,
curtains, and any delicate objects. Before operation, always ensure that the
appliance is assembled properly and completely. Solely use the appliance
for processing edible food. Immediately unplug the appliance, if there is any
kind of malfunction or problem (e.g. the motor gets stuck, overheating).
• Operate the appliance on a well accessible, stable, level, dry, water-resi-
stant and suitable large table or counter. Always keep the appliance and the
table or counter clean and dry, and wipe off spilled liquids immediately. Do
33