Balluff BVS ID-M1280 F1 Serie Konfigurationsanleitung Seite 170

BVS ID-M1280xF1-xx-xxx
 NOTE
In order to access this folder, you have to use the following credentials:
• Login: expert
• Password: expert
Sensor Clock
In this section you can adapt the settings for the system date and time.
Setting
Use NTP server
NTP IP address
System date
System time
Time zone
Use PC time for sensor
 NOTE
If the date of the BVS ID has not been initialized, it starts with March 24, 2021.
12 english
Determines whether a time server should be used to get the current time.
 NOTE
When the BVS ID is connected to a network whose DHCP server provides an NTP
server or it has an internet connection, then the BVS ID synchronizes the time with that
NTP server or with Google automatically, even if this field is not active.
The address of the time server to ask for the date and time. The time zone still has to be set
manually.
Shows the system date.
Shows the system time.
Specifies in which time zone the BVS ID is located.
Sets the PC/Browser time in the Sensor. This function is only available if the option "Use NTP-
Server" is deactivated.
Description