Moving The Appliance; Replacing The Filter - Haier SBS 90 Serie Bedienungsanleitung

Moving the appliance

1. Remove all food and unplug the appliance.
2. Secure shelves and other moveable parts in the fridge and the freezer with
adhesive tape.
3. Do not tilt the refrigerator more than 45° to avoid damaging the refrigerating
system.
EN
WARNING!
▶
Do not lift the appliance by its handles.
▶
Never place the appliance horizontally on the ground.

Replacing the filter

The water filter has to be changed approxirmately every 6 months , when the indica-
tor "c3" (Filter Reset function) lights up .
The filter set can be ordered via the CUSTOMER SERVICE .
WARNING!
▶
Before replacing the filter deactivate the appliance and disconnect the mains
plug from the mains socket .
▶
Turn off water supply .
1. Remove (1) the locking cip ( C ) on both
sides of the filter ( A ) and disconnect both
pipes (2)
2. Install the new filter in correct position; the
dart shows the direction of water flow .
Repeat step 1 in reverse order .
3. Put the plug into the socket and open the
water tab to flush the hoses.
4. Reset the " Change Filter " indicator : hold
the button "C" (Filter Reset function selec-
tor) for 3 seconds , indicator " c3 " turns off.
WARNING!
▶
Ensure always that the connection is firm , dry and leak free !
▶
Take care the hose never to be crushed , kinked , or twisted .
30
Care and cleaning
Indicator on