Haier SBS 90 Serie Bedienungsanleitung Seite 19

Ice maker mode
1. Under unlocked state, press the button "E" (Ice maker mode selector) and hold
for 3 seconds, the buzzer rings once, the indicator "e2" (Ice maker mode) illumi-
nates, and then the ice maker mode will be turned on.
2. When the indicator "e2" (Ice maker mode) illuminates, press the button "E"
(Ice maker mode selector) and hold for 3 seconds, the buzzer rings once, the
indicator "e2" (Ice maker mode) goes off, and then the ice maker mode will be
turned off.
Hold for 3s
Notice
When the application is powered on , the ice maker is off by default .
When you don ‚ t need ice cubes for a long period of time , please turn off the lce
Maker function , empty the container and insert the cleaned container .
The lcemaker can only be configured with manufacturer or purchased from its
service agent .
Water intake function
Under any state (locked or unlocked), press the button "H1" (Water intake function
selector), the buzzer rings once, the indicator "h1" (Water intake function) illumi-
nates, and then the water intake function will be turned on.
Notice
1. When the indicator "h1" (Water intake function) illuminates, the indicator "h2"
(Cubed ice function) and the indicator "h3" (Crushed ice function) go off. After
the dispenser paddle is pressed, water will flow out of the intake port.
2. When the water intake time reaches 150s, the refrigerator will beep and keep
water until the time reaches 180s, the water will be cut off and the water valve
will enter the 200s protection time, and then water intake can be carried out
again.
3. When the cumulative water intake time reaches 5min within 10min, the water
valve enters the 10min protection time, and then water intake can be carried
out again.
Indicator on
Ice making function on
Press 1 time
Water intake function on
Indicator off
Hold for 3s
Ice making function off
Indicator on
Use
EN
19