Energy saving tips
▶
Make sure the appliance is properly ventilated (see INSTALLATION).
▶
Do not install the appliance in direct sunlight or in the near of heat sources (e.g.
stoves, heaters).
▶
Avoid unnecessarily low temperature in the appliance. The energy consump-
tion increases the lower the temperature in the appliance is set.
▶
Functions like POWER- FREEZE consume more energy.
▶
Allow warm food to cool down before placing it in the appliance.
▶
Open the appliance door as little and as briefly as possible.
▶
Do not overfill the appliance to avoid obstructing the air flow.
▶
Avoid air within the food packaging.
▶
Keep door seals clean so that the door always closes correctly.
▶
Defreeze frozen food in the fridge storage compartment.
▶
The most energy-saving configuration requires the appliance keep drawers,
food box and shelves on factory-fresh condition, and food should be places as
far as possible without blocking the air outlet of the duct.
Use
EN
25