Inhaltsverzeichnis
Werbung
Switch on the router. Loosen retaining lever (14) and slowly lower the
router to the workpiece until the adjusted depth-of-cut is reached. Re-
tighten the retaining lever (14).
Lead the router with projecting
template follower along the
template by applying light
sideward pressure.
Templates can be purchased
separately or you can design your own templates. For detailed information
on templates refer to a wood-working book.
Maintenance and Cleaning
▪ Do not use abrasives or aggressive chemicals such as benzene to clean
the machine. Use a soft, dry cloth and a stiff brush.
▪ Keep the ventilation louvers clean and free from foreign objects to
avoid heating up the motor.
▪ Store the router in dry locations and protect the unit from dust and dirt.
Technical Data
Typ
Nominal Voltage
Nominal Power
Speed
Vertical Lift
Collet
Sound Pressure Level
Sound Power Level
Hand Arm Vibration
Protection Class
* Sound and vibration emissions may differ from the declared values during use depending on the
ways in which the tool is used.
WOF 1600
230 V~ / 50 Hz
1600 W
6000 – 26000 min-1
50 mm
Ø 6 mm / 8 mm / 12 mm
LpA = 96 dB(A), KpA = 3 dB
LwA = 107 dB(A), KwA = 3 dB
Ah = 7,07 m/s2, Kh = 1,5 m/s2
II
19
Werbung
Inhaltsverzeichnis
