Inhaltsverzeichnis
Werbung
Before first Use
Unpack the router and check all parts for any damage in transit. Dispose of
packaging materials or store it out of reach of children. Plastic bags etc. may
become a deadly toy for children.
Power Mains Connection
Make sure the mains voltage is the same as the operating voltage indicated
on the rating plate.
Switching ON/OFF
To operate the machine press and hold the safety button (2) and the the
ON/OFF switch (3) mounted in the right hand side handle.
Inserting the Milling Cutter
1. Pull the power plug before undertaking any manipulations on the
machine.
2. Make sure that the collet and the shank of the milling cutter (10) are
of the same size. The machine is supplied with col-lets for 6, 8 and 12
mm tool shafts.
3. Press the spindle lock (8) and
unscrew the collet nut (10) and
insert the milling cutter. The
milling cutter shank must be
inserted at least 20 mm into the
collet.
4. Press the spindle-lock (8) and
tighten the collet nut tightly with
the included fork spanner. Never tighten the collet nut with the fork
spanner without first inserting a milling cutter.
OPERATION
15
Werbung
Inhaltsverzeichnis
