Inhaltsverzeichnis
Werbung
▪ On completion of work, allow the machine to slide back to its
initial position by releasing the retaining lever.
▪ Make yourself familiar with your working area and be alert for
possible hazards, which you might not hear due to machine
noise.
▪ Caution: Allow for run down time of cutter after turning router
off. Wait for the machine to come to a complete stop before
removing from the work piece.
▪ Never attempt to slow the router down with your hands.
▪ Do not touch the cutter immediately after operation; it may be
extremely hot and could burn you.
▪ Never stop the router by applying lateral pressure to the cutter.
▪ Do not force the router. Your router will do a better job if you
take it slowly.
▪ Avoid cutting nails and screws. Inspect timber and remove all
nails and screws before cutting.
▪ In the event of an electrical or mechanical malfunction,
immediately switch off the router and disconnect the power
lead from the mains supply.
▪ Keep the ventilation louvers clean and free from foreign objects.
▪ Do not use abrasives or aggressive chemicals such as benzene to
clean the machine. Use a soft, dry cloth and a stiff brush.
▪ During operation always wear safety
goggles and if necessary ear protectors
and a face mask, depending on the used
material.
▪ Do not disassemble the machine and do not try to repair it
yourself. Have the unit repaired by a professional or turn to our
customer support service.
14
Werbung
Inhaltsverzeichnis
