Inhaltsverzeichnis
Werbung
DESCRIPTION AND FUNCTIONS
BESCHREIBUNG UND FUNKTIONEN
DESCRIPTION ET FONCTIONS
O
Q DAMPING control
Set this control to the specified tracking force of the
cartridge to smoothen horizontal and vertical stylus tracing
of the record grooves and lower the resonance peak levels
of the tonearm.
© ANTI SKATING control
Set this control to the specified tracking force of the
cartridge using the • -marked index for a conical stylus,®
marked index for an elliptical or a Shi bat a stylus. This
cancels the centripetal force (sliding force of the tonearm
to the center of the record) and prevents the stylus tip from
exerting unwanted force to the inner side of the record
groove.
© Speed indicator
When the platter reaches the proper speed, the "33" or
"45" indication will change from red to green.
O
TRACKING FORCE control
Turn this control to add tracking force according to the
specified tracking force of the cartridge.
© READY switch
Press this switch to turn the power on. The speed indicator
"33" and the SIZE indicator "30" will light to show that
the power is on and the tracking force set with the TRACK¬
ING FORCE control is applied to the tonearm. Press it
again to turn the power off.
Note:
Even when the READY switch is pressed to OFF, about
2.6 watts is consumed. Accordingly, unplug the power cord
from the wall outlet when not in use.
© 45, 33 switches
Select the platter speed with these switches.
Press the "45" switch for a 45 rpm record and press the
"33" switch for a 33-1/3 rpm record. The speed indicator
corresponding to the record rpm will light.
O TT-START/STOP switch
Press this switch to start or stop the rotation of the platter
only for manual operation.
© REPEAT button
Press this button to repeat play of a record.
The REPEAT indicator will light. To release the repeat
play, press this switch again and the REPEAT indicator will
go out.
Note:
If the START/STOP switch is pressed while playing a
record, the repeat play will be automatically released and
the tonearm will be returned to the rest.
O SIZE button
Use this button to select the record size for automatic play.
The tonearm is lowered on the outer groove of a 17-cm
record when "17" on the SIZE indicator is lit and of a 30-
cm record when "30" is lit.
Note:
It is possible to change the tonearm descent position when
the tonearm is moving but it is impossible to change it
when the tonearm starts to descent.
(F> <, > buttons
It is possible to move the tonearm to a desired position by
hand or by using the following buttons.
< : Press this button to move the tonearm to the left and
release this button to stop it.
> : Press this button to move the tonearm to the right and
release this button to stop it.
® UP/DOWN button
If this button is pressed when the tonearm is raised, the
tonearm will be lowered; if this button is pressed when the
tonearm is lowered, the tonearm will be raised. This is use¬
ful for manual play.
<b
START/STOP switch
Press this switch to start automatic play or to stop playing
in the middle of a record. This switch acts as a start switch
for starting play of a record and when this switch is pressed
while a record is being played, it acts as a stop switch.
-
7
-
Werbung
Inhaltsverzeichnis
