Assembling The Belt And Disc Sander - Westfalia 25 56 53 Bedienungsanleitung

Assembly
The belt and disc sander is shipped completely in one box.
Carefully unpack the machine and all loose items from the carton. If any parts
are missing, do not attempt to operate the belt and disc sander until the
missing parts are obtained and installed correctly.
Keep packaging materials out of range of children. There is danger of
suffocation!

Assembling the Belt and Disc Sander

1. Select a suitable work place before using the belt and disc sander. Your
work place should be well illuminated and enables you attaching a dust
collection system or a vacuum cleaner.
2. Place the belt and disc sander on a workbench or mount the sander on a
table with screws.
3. If it this not possible, use the included rubber feet (4). If the rubber feet are
not attached, press them from the upper site of the base (5) through the
edge openings.
The mentioned digits refer to the Parts List pages 17-20.
Operation
13