Safety Notes - Westfalia 82 58 62 Bedienungsanleitung

Please note the following safety notes to avoid malfunctions,
damage or physical injury:
 First read and understand the manual before using the auto-darkening
welding helmet.
 Persons with limited physical, sensorial or mental abilities are not
allowed to use the unit, unless they are supervised for their safety by a
qualified person or are briefed by the responsible person how to use the
unit.
 The auto-darkening welding helmet is not suitable for laser welding or
laser cutting processes and gas welding.
 Heat and radiation are released during arc-welding. The welding helmet
provides protection for your eyes and face. Wear appropriate protective
clothing in order to protect the rest of your body. Never undertake
welding without eye and body protection.
 When welding poisonous gas will be formed. Use appropriate respiratory
protection.
 Never disassemble the auto-darkening filter cartridge.
 Before using the auto darkening helmet, check if all parts are clean and
inspect all parts for signs of mechanical wear or damages. If there are
cracked, scratched and pitted parts, replace the parts immediately in
order to avoid injuries.
 Do not expose the welding helmet to excessive temperatures or strong
vibrations and avoid strong mechanical stresses. Never place the
welding helmet on a hot surface.
 Please note that the welding helmet will not protect against severe
impact hazards.
 Never use the welding helmet when undertaking cut-off work with
grinding discs. The welding helmet is only suitable for welding and
grinding work.

Safety Notes

4