Sensor Alarm; Recorded Pictures Mode Alarm - Sony YS-DX516P Bedienungsanleitung

Notes
• The alarm display mode on monitor 1 is selected
according to the settings entered in the (ALARM
SET) menu.
• During normal monitoring operations the INPUT
SELECTOR indicator lights according to the
displayed camera. If there is an alarm trigger for
another camera, the indicator will flash.
• If the alarm is not reset, "VIDEO LOSS" will be
displayed until normal live picture signals are
restored. If the display mode is changed it will switch
from a frozen picture to color bars.

Sensor Alarm

When in the (SENSOR SET) menu, the "SENSOR
ALARM" item is set to "ON" or "AND", a moving
subject detected by the video sensor in the selected
area of the image can trigger an alarm.
Example: If movement is detected at camera 4
(in multi-display screen)
1
The buzzer is heard and the INPUT SELECTOR 4
indicator flashes.
That particular alarm output changes from OPEN
to LOW (0 V).
2
The image from camera 4 and the camera number
(04) will be displayed on monitor 1, and SA
(Sensor Alarm) will flash at the left of the camera
number.
The action (such as the alarm duration, alarm
recording mode, etc.) taken here will depend on the
settings entered in the (SENSOR SET) and the
(ACTIVE REC SET) menus (see pages 44 (GB),
45 (GB)).
Sensor alarm
Camera number
Resetting the Alarm
Press the ALARM RESET button. All alarms are
deactivated. The alarm displays are erased and the
buzzer sound is stopped if the buzzer has been set in
the menu.

Recorded Pictures Mode Alarm

There are four types of recorded pictures alarms; the
alarms recorded on tape and the alarms set by an
external alarm trigger, the alarms set by a loss of the
video signal and the alarms set by the video sensors.
Alarms recorded on tape
When a tape with recorded alarm triggers is played
back, this unit will trigger an alarm, and the alarm
display will appear on the concerned camera picture,
but the alarm operation will not be activated as for live
pictures mode alarms.
External Alarms/Sensor Alarm/Video Loss
Alarm
• If during VCR playback, an alarm trigger (External
alarms, Sensor alarm, Video loss alarm) is received at
the ALARM IN terminals on back panel, the
concerned INPUT SELECTOR indicator flashes, the
buzzer is heard and the alarm signal is output at the
corresponding SENSOR ALARM OUT terminal.
However, the display on monitor 1 will not switch as
for the live pictures mode external alarms operations.
• If in the (ALARM SET) menu, the item "MON.2
OUT" is set to "ON", the alarm screen live pictures
will be displayed on monitor 2. To monitor the alarm
on monitor 1, switch to live pictures mode.
61
(GB)