Sony YS-DX516P Bedienungsanleitung Seite 44

Menu Setting Mode
SENSOR SET
When the internal video sensor detects a movement in
the live video signal, it can be set to trigger an alarm.
Priority recording of the concerned pictures can also
be set in (ACTIVE REC SET) (see page 45 (GB)).
Setting the SENSOR SET Mode
1
Press the MENU button 4 times. Press the v button
to go to the (SENSOR SET) menu.
2
Using the + (or –) button, select the desired
"SENSOR ALARM" setting, then press the v
button.
Following this procedure, select the settings for
"DURATION".
3
Press the MENU button to go to the next menu
screen, or
Press the EXIT button to exit the menu display.
(SENSOR SET) menu
SENSOR ALARM (Default setting: OFF)
This will set it the internal video sensor triggers are
considered as alarm triggers.
ON: The sensor triggers will be considered as alarms,
and when received the display will switch to the
selected alarm display mode and the buzzer will
be heard.
OFF: The sensor triggers are not considered as
alarms.
AND: Only when a sensor trigger and an alarm
trigger are received simultaneously, it will be
considered as an alarm.
44
(GB)
Caution
If SENSOR ALARM is set to AND, a trigger to an
ALARM IN terminal alone will not be considered as
an alarm.
DURATION (Default setting: 10 S)
When a video sensor detects a movement, this will set
the active recording mode duration (see the right
column on this page).
The available durations are:
1, 2, 3, 4, 5, 10, 20 (in 10 seconds increments)...
180
Note
When the SENSOR ALARM settings "ON" and
"AND" are used, the internal video sensor can trigger
an alarm operation. The alarm duration is set by the
"DURATION" setting in (ALARM SET) (see page 42
(GB)).