Sony YS-DX516P Bedienungsanleitung Seite 51

5
Press the INPUT SELECTOR (1 – 16) button to
select the desired camera (ex: camera 5).
6
Press the v button to highlight the "AL.
DURATION" setting.
7
Press the + (or –) button to set the desired duration
(ex: 20 sec.) in the DAY column, then press the b
button.
8
Press the + (or –) button to set the desired duration
(ex: 30 sec.) in the NIGHT column.
If there is an alarm triggered, the alarm duration
will be as set for each camera.
9
Press the MENU button to go to the next menu
screen, or
Press the EXIT button to exit the menu display.
(CAMERA SET) menu
AL. DURATION (Default setting: DAY and NIGHT
to 10 S)
If in the (ALARM SET) menu, the item
"DURATION" is set to "INDIV.", enter the desired
alarm duration for each camera.
The available durations are:
1, 2, 3, 4, 5,10, 20 (in 10 seconds increments)...
180, CC, NC, OFF
CC: The alarm will go on as long as the alarm signal
is received (minimum 1 second).
NC: The alarm will continue until reset.
OFF: No alarm duration setting.
Setting the Monitor Masking for Each Camera
1
Press the MENU button twice to display the
(TIMER SET) menu, then check that the day and
night periods are set as desired. (For more
information on the day and night periods settings,
see "TIMER SET" on page 37 (GB).)
2
Press the MENU button 5 times to display the
(CAMERA SET) menu.
3
Press the INPUT SELECTOR (1 – 16) button to
select the desired camera (ex: camera 5).
(Continued)
51
(GB)