Fan Housing - Bosch DCU 130 Instandsetzungsanleitung

4. Read off charge state of the battery by pressing the
button (1).
 The battery charge indicator (2) lights for a few
seconds and shows the current battery charge on
a scale of 0 to 100.
 Replace the battery if the display shows a charge
state of 0 and the battery cannot be loaded any
more.
Replace battery
1. Remove old battery.
2. Insert new battery and press home until heard to
engage.
Robert Bosch GmbH
Repairs | DCU 130 | 1�
6.5

Fan housing

i
The fans are integrated in the fan housing. That's
why no separate fans are exchanged, but the com-
plete fan housing.
Dismantling
1. Remove the screws from the handle (1).
2. Remove the handle.
3. Remove the screws from the fan housing (2).
Replacing the component
1. Remove old fan housing.
2. Insert new fan housing.
Fitting
¶
Assemble the tester by following these instructions
in reverse.
en
|
1 689 975 217 2011-06-07