6.8
Pen holder
Dismantling
1. Remove the screws from the handle (2).
2. Remove the handle.
3. Remove the screws from the ventilation housing (3).
4. Remove the ventilation housing.
5. Remove the screws from the pen holder (1).
Replacing the component
1. Remove old pen holder.
2. Insert new pen holder.
Fitting
¶
Assemble the tester by following these instructions
in reverse.
Robert Bosch GmbH
Repairs | DCU 130 | 21
|
1 689 975 217
2011-06-07
en