Display And Operating Elements - Conrad 75 16 99 Bedienungsanleitung

7. Display and operating elements

(see fold-out page)
The illustrations are located on the front fold-out page.
The following numbers refer to the ones on those images.
1) Fan
2) "MENU/POWER" button
Access the system menu by briefly pressing
this button. Pressing this button for three sec-
onds puts the LCD screen with digital
recorder into standby. The fan continues to
run in standby mode, and the "PWR" status
LED continues to light green.
3) "UP" button
4) "DOWN" button
5) "+" button
6) "-" button
7) "CH1" button
8) "CH2" button
9) "CH3" button
10) "CH4" button
11) "QUAD" button
12) "HDD" status LED
The HDD status LED flashes when data is
exchanged with the hard disk or when a
recording takes place.
13) "PWR" status LED
This LED lights up green when the operating
voltage is properly supplied.
14) "MENU/ESC" button
15) "UP" button
16) "SEL/EDIT" button
17) Speakers
18) "REW" button
19) "PAUSE" button
20) "PLAY" button
21) "FWD" button
22) "STOP" button
23) "REC" button
24) IR receiver
25) "DOWN" button
26) "PTZ" button
Used for controlling a PTZ camera
(not included)
27) Hard disk slot cover
28) Connection terminal
"RS485/SENSOR/ALARM"
29) Video inputs "CH1 – CH4" (BNC)
30) "PS2 MOUSE" connection
31) Audio inputs "AUDIO INPUT" (2 x RCA)
32) Video output "VIDEO OUTPUT" (BNC)
33) Connection for the power supply
"DC 12V"
34) Audio outputs "AUDIO OUTPUT" (RCA)
35) "ON/OFF" switch
36) "CH1", "CH2", "CH3" and "CH4" buttons
37) "PLAY" button
38) "REW" button
39) "REC" button
40) "PAUSE" button
41) "MENU" button
42) "SEL/EDIT" button
43) "QUAD" button
44) "FWD" button
45) "STOP" button
46) "PTZ" button
Used for controlling a PTZ camera
(not included)
47) "UP" button
48) "DOWN" button
43