7
Click "Call" → "Disconnect" and then click "File" →
"Properties." The Properties window will be displayed.
Click on the "Settings" tab on the Properties window and click
the "ASCII Setup..." button. The "ASCII Setup" window will
appear.
Check "Send line ends with line feeds" and "Echo typed
characters locally" and then click the "OK" button. The
Properties window will close.
Click "Call" → "Connect."
8
Press "R" → "Return" on the keyboard to display the data on
the screen and check that communication can be performed.
22
(E)
MG10-P1 / MG10-P2