Overview; Features - Sony MG10-P1 Bedienungsanleitung

1. Overview

The MG10 main module combines counter modules and an I/F
module into a single unit that can output measurement data and
make various settings from a RS-232C port (standard feature) and
an I/O connector. The minimum configuration includes one main
module and one counter module; the maximum configuration
consists of one main module, 16 counter modules and one I/F
module. Furthermore, by connecting the units using a link cable,
up to 16 units can be connected (up to 64 counter modules can be
connected), and control can be exercised and data output from a
single RS-232C connector.
Counter modules are available for use with DK series, DG**B
series, DL**B/BR series, and DT series measuring units. In
addition, these counter modules can also be mixed and used in
combination.
MG10-P1 / MG10-P2

1-1. Features

. Small size ideally suited for incorporation inside an electrical
parts panel
. Construction that allows for installation on DIN rails (35 mm
DIN rail)
. Expansion from 1 to 16 channels enabled by module
configuration
. Connection of up to 64 channels possible using the link cables
. Mixing and connection of any models in the DK series, DG**B
series, DL**B/BR series and DT series measuring unit for use
together
. Input resolutions of 0.1 µm, 0.5 µm, 1 µm, 5 µm and 10 µm
supported
. Measurement of maximum values, minimum values and peak-
to-peak values possible in addition to current values
. Go/No Go judgment can be carried out by the comparator
function
. Four different sets of comparator setting values can be set
. Choice between two hold functions when the measuring unit is
retracted for work changes:
1 Latch function for temporarily holding the current values
2 Pause function for temporarily stopping the updating of the
maximum values, minimum values and peak-to-peak values
. RS-232C interface provided as standard
. BCD output enabled by connection of BCD module which is
sold separately
. DC +12 to +24 V external power supply
1
(E)