Inhaltsverzeichnis
Werbung
About template, you can buy it
on the market, or DIY before
routing. For detailed infor-
mation on templates refer to a
routing/woodworking book.
PART B: Guide Wheel
1. When an edge is curved attach the guide wheel to the parallel guide (6)
assembly.
2. First remove both black caps and fit the
guide wheel on the parallel guide re-using
two of the machine screws and washers. If
required, adjust the wheel height to
correspond with the edge to be followed.
3. Loosen the wing screw, set the height and
fix the wing screw again.
Accessory
21
Werbung
Inhaltsverzeichnis
