Cleaning and Care
The materials from which tie downs are produced have varying
resistance to chemical effects. Make sure the tie down does not
come into contact with chemicals.
Clean the tie down with clear water only without using additional
chemicals.
If the tie down becomes wet during use or while cleaning, hang
up for drying. Do not heat up the tie down or quick-dry in any
case (e. g. using heaters).
Storage
Before storing always check the tie down for possible damage
resulting from use. Do not store a damaged item.
When not using the tie down, store it on a shelf in a clean, dry
and well-ventilated environment. Keep it away from heating,
chemicals, fumes, corroding surfaces, direct sunlight or other
ultraviolet light sources.
Technical Data
Lashing Capacity LC
Lashing Capacity Strapping
Standard Hand Force S
Standard Tension Force S
Belt Width
Total Length
Material
Extension
Working Temperature
Using
150 daN
300 daN
25 daN
HF
60 daN
TF
25 mm
1.8 m
PES
< 7 %
-20° C up to +60° C
15