Conrad FS20 IRP Bedienungsanleitung Seite 32

This means that each key pair is assigned to a channel. The key commands are configured
in such a way that an actor is deactivated or dimmed down with the left key of the key pair.
An actor is activated or dimmed up with the right key.
An "actor" is a device of the FS20 radio switching system that is able to perform a switching
or dimming command.
• By pressing the button "doppelte Kanalzahl" (= "Dual channel number") in the field
"Erzeugen" (= "Generate"), the addresses are changed in such a way that each key is
assigned to one channel:
Address configuration of the standard assignment with dual channel number:
Button:
Address:
Button:
Address:
Button:
Address:
Button:
Address:

However, the standard assignments thus generated do not correspond to the
standard key assignment of an FS20 handheld transmitter.
There is however only one difference with the generated addresses, the
commands themselves are identical.
• To generate a standard assignment for FS20 handheld transmitters, select the checkbox
"Standardbelegung Handsender" (= "Standard assignment handheld transmitter") and then
click on the button "normale Kanalanzahl" (= "Normal channel number") or "doppelte
Kanalanzahl" (= "Dual channel number").
• By selecting the checkbox "Standardbelegung" (= "Standard assignment"), you return to the
standard assignment of the IRP program.
• You can also perform the assignment individually in acc. with the FS20 address system
according to your specifications (for a detailed description, refer to the operating instructions
of any FS20 transmitter).

However, when freely programming the keys, it is no longer possible to select
between "single/dual channel number", because all keys can be assigned
individual commands and addresses here.
32
1 2
11 11 11 12
6 7
11 22 11 23
11 12
11 33 11 34
16 17
11 44 12 11
3 4
11 13 11 14
8 9
11 24 11 31
13 14
11 41 11 42
18 19
12 12 12 13
5
11 21
10
11 32
15
11 43
20
12 14