Cleaning and Storing
Make sure that the device has completely cooled down before storing.
Regularly clean the machine housing with a soft cloth, preferably after
each use.
Keep the ventilation slots free from dust and dirt.
If the dirt does not come off use a soft cloth moistened with soapy
water. Never use solvents such as petrol, alcohol, ammonia water, etc.
These solvents may damage the plastic parts.
Technical Data
Voltage: 230 – 240 V~ 50 Hz
Power: 2000 W
Air Flow: 500 litres/minute
Setting I: 50° C
Setting II: 400° C
Setting III: 600° C
Operation
24