Inhaltsverzeichnis
Werbung
Option 3: BBQ/Fireplace Lighter
The BBQ and fireplace lighter is always to be used without the extension
handle.
1. Remove the extension handle by pressing and releasing button (7).
2. Pull the extension handle from the device.
Operation
1. Remove the protective cap (9) from the device.
2. Attach the BBQ nozzle onto the device.
3. Select temperature setting III.
4. Place the nozzle under the coal or the wood.
5. Ensure that the firelighter is properly positioned.
6. Insert the plug into the socket.
7. Make sure the nozzle is not blocked before turning the device on.
8. Remove the device from the coals or the wood as soon as it starts to
glow.
9. Now blow hot air into the coals or wood from a distance of around
5 – 10 cm, until the coals or wood is burning properly.
10. Doing this will help to avoid damaging the nozzle attachment. Expos-
ing the nozzle to high temperatures for a prolonged period of time
could cause the material to melt. Please follow these instructions to
achieve long-term enjoyment with the product.
Watch Out! To avoid overheating of the BBQ or Fireplace do not use the
device for longer than necessary.
Cooling
Before turning off the device, it must be cooled first.
1. Select temperature setting I for at least one minute.
2. The device can be switched off thereafter.
Place the device on its stand (10) after use and allow it to cool down
before storage.
Operation
23
Werbung
Inhaltsverzeichnis
