Before first Use
Remove the device from the packaging. Keep packaging material out of
reach of small children. There is risk of suffocation!
Make sure the mains lead and the mains plug are in a good state:
strong, without ravels or damages.
Caution is advised when using long extension cables.
Do not use the device under moist circumstances.
The metal mouthpiece gets hot. Watch out and do not touch the metal
mouthpiece.
Prevent damage of the heating element. Do not lock or block the mouth
piece.
Do not leave the device unsupervised when switched on.
When in operation do not point the device at people or animals.
Never look into the hot air nozzle.
Do not use this device in rain or damp surroundings, or near explosive
or flammable products.
Do not use the device on or near very dry spots to avoid fire.
Always remove the plug from the socket when not using the device,
when replacing the nozzles or during maintenance of the device.
Do not point the device at the same place for longer periods of time.
Do not hold the device too close to the surface about to be worked on
as the device can overheat.
Pay attention to the direct/indirect workspace as the heat can ignite
flammable materials, which are close by but not necessarily in view.
Do not allow the hot parts of the device to touch the cord or other
flammable materials.
The device should always be clean, dry and free of grease and oil.
Do not use the device for purposes other than for which it is intended.
This device operates at a temperature of 600 degrees without
visible signs of this temperature (no flames); still there is a
chance of fire risk. Watch out for the hot air stream from the
mouth piece. This air stream can cause burns.
Hints
18