Ringtone Settings - Panasonic VL-SWD501EX Bedienungsanleitung

9. Additional functions
Configuration (Configure the settings as follows while talking or monitoring.)
: Touch
table).
*1 [Sound] and [Display] are not displayed when talking or monitoring with a camera.
) ® configure the settings that you want to change (see the following table).
: (
Changing the
receiving volume of
incoming calls
Changing the owner's
voice volume (output
*1
to the doorphone)
*1
Using voice changer
Turning the
doorphone's LED
*1
lights on or off
Using backlight
compensation for
*1
doorphone images
Changing the
screen's brightness
*1 Can only be configured when talking or monitoring with a doorphone.

9.3 Ringtone settings

9.3.1 Ringtone type settings
You can change the ringtone that is heard when receiving calls from the doorphone or the camera. (The ringtone of
the intercom call cannot be changed.)
– For information about how to configure settings, see page 36 for the main monitor and page 38 for the sub
monitor.
34
*1
® [Sound] or [Display]
Touch [Receiver volume], and then adjust the volume by touching [–] (Quieter)
or [+] (Louder).
: "Volume" ®
Touch [Owner's voice volume] and then adjust the volume by touching
[Quiet] or [Normal].
Touch [Voice changer] ® [On].
: "Voice changer" ®
Touch [Illumination], and then touch [On] or [Off].
: "Illumination" ®
Touch [Backlight compensation] and then
adjust the backlight compensation using
either [–], [Off], or [+].
: "Backlight" ®
: Adjust the backlight compensation.
Touch [Brightness], and then adjust the brightness by touching [–] (Darker) or
[+] (Brighter).
: "Brightness" ®
® configure the settings that you want to change (see the following
) ®
(
(
(
) ®
(
) ®
(
: Adjust the volume.
)
) ®
: Select the required setting.
R [–]: use when faces appear
too bright (makes images
darker)
R [Off]: turns off backlight
compensation
R [+]: use when faces appear
too dark (makes images
brighter)
: Adjust the brightness.