Wall Mounting; Setting The Language, Date And Time; Wide/Zoom Settings And Zoom Position Settings - Panasonic VL-SWD501EX Bedienungsanleitung

Battery level
Icon
High
Medium
Low
Needs charging
R See page 43 for a guide on operating times for the
sub monitor.
Note:
R When the sub monitor is off the charger or the AC
adaptor is disconnected for 1 week or more, remove
the batteries in order to maintain battery performance
and prevent the batteries from discharging.
– Recharge the batteries before using the sub
monitor again.

3.6 Wall mounting

Note:
R Make sure that the wall and the fixing method are
strong enough to support the weight of the unit.
R Drive the screws (locally procured) into the wall.
3.7 Setting the language, date and
time
– This operation can only be performed on the main
monitor.
A language selection screen is displayed when the main
monitor is first used. Follow the steps below to configure
the language, date and time. (The notification indicator
flashes when these settings have not been configured.)
1
Touch the language that you want to use and then
touch [Next].
2
Configure the date and time by touching [+] and [–].
3
Touch [OK] to complete the settings.
R A beep sounds and the screen turns off.
Changing the language, date and time
The language, date and time can be changed from the
settings button in the top menu. (® page 35)
Battery level
25 mm
Note:
R The sub monitor's language (including the language
of additionally registered sub monitors) is
automatically matched to the main monitor's
language setting.
R The date and time settings may be deleted when
there is a power outage. In this case, reconfigure the
settings.
R The time may get out of sync by about 60 seconds a
month.
3.8 Wide/zoom settings and zoom
position settings
– This operation can only be performed on the main
monitor.
You can configure how doorphone images are initially
displayed on the main monitor and sub monitor.
Wide/zoom settings
From the following 3 settings, you can select how images
are initially displayed when visitors come or when
monitoring.
*1
Zoom display
*2
Wide display (default setting)
Entire image display (main monitor only)
*1 Because a digital zoom is used, image quality is
lower when compared to images in wide display or
entire image display.
*2 The top and bottom parts of wide display images on
the main monitor are cut off when compared to
images in entire image display.
Zoom position settings
You can configure which parts of images are zoomed in
on when displaying zoomed images. Adjust the position
3. Preparation
(images are zoomed in
on 2 times more that in
wide display)
15