Panasonic VL-SWD501EX Bedienungsanleitung Seite 16

3. Preparation
so that the people or objects that you want to view are
displayed centrally in the screen.
Settings:
1. From the top menu, touch
[Initial settings].
2. Configuring wide/zoom settings:
A Touch [Wide/Zoom settings] and then select
the doorphone to be configured.
B Touch [When visitors come] or [When
monitoring], and then select the display
method (Zoom, Wide, or All).
R A beep sounds and the settings are
changed.
C To end the operation, press
Configuring zoom position settings:
[Zoom position settings] ® select the
A
doorphone to be configured.
(The current doorphone image is displayed in
the wide display.)
B Touch the position that you want to be
zoomed in on, and then touch [OK] after
confirming the selected position.
R A beep sounds, "Configured" is
displayed, and then the screen
automatically turns off.
Note:
R When [Zoom] is selected for [Wide/Zoom settings]:
– Adjust the zoom position so that people or objects
that you want to view are displayed centrally in
the screen. (® page 15)
– When images are recorded, only the areas
displayed when zooming are recorded.
R The zoom position screen automatically turns off if
settings are not completed in about 90 seconds. In
this case, settings are not saved and must be redone.
16
® ®
.