Werbung
Verfügbare Sprachen
Verfügbare Sprachen
J-S5UB9, FS, W
11. Motor
Motor bracket
\
B3X6
Fig. 27
Fig. 30
Installation of the cassette holder assembly
Before installing the cassette holder assembly, first check that
12. Gear assembly
the eject slider, eject arm and the counter belt are as shown in
The gear assembly is composed of the gears, cams, clutches,
the Fig. 28.
and reel, of the full auto-stop mechanism, fast forward/rewind
Note : When the eject slider and eject arm are not as shown in
mechanism
and take-up
mechanism.
It can
be removed by
the figure, the eject operation may not be smooth or the
removing the fixing screws (Fig. 31).
tape may touch the recording prevention arm, making the
cassette holder not fit it properly.
P3X25
fject arm
Fig. 31
Installation of the gear assembly
|
|
:
'
eletaiaer.
Install the gear assembly after setting the chassis body to the fast
Counter belt
forward mode.
Incidentally. check the gear assembly so that it is
in the fast forward mode.
rm
a) Turn the function arm (shown in Fig. 32) in the direction of
the arrow until it touches the point shown by arrow
6) on
the take up arm.
The reel. the function gears and function
Fig.
28
arm go into the mode shown in Fig. 33.
10. Flywheel supporter
Function arm
Function gear (Rewind)
Function gear (Fast forward)
™N
F)
|
"
Take:
"yy
Take-up arm
ae upirect
BI3X1i
_
gu
'
Fig.
32
Fig. 29
1D es
English
rac ame ars: 0
Werbung
