Werbung
Verfügbare Sprachen
Verfügbare Sprachen
92
- 84
PROBLEM GUIDE
LL
Se
Bt
A
I
A
SI
PROBLEM
SOLUTION
©
Check to see if the VTR is plugged into an AC
outlet.
Does not respond to
e
Check to see if there are batteries in the unit and
remote control unit
their polarities are correct.
VTR 1/VTR 2/TV switch must be in the VTR 1
position.
Remote control unit is not aimed at the VTR.
Weak battery is in the remote control unit.
Will not record
No cassette in the VTR.
Erase prevention tab removed from cassette.
(In this case, cassette will be ejected.)
Will not playback
No cassette in the VTR.
For playback, TV must be tuned to UHF channel 37.
Set the TV to the video input mode when the VTR
and TV are connected via DIN or EURO connector
{see your TV manual).
Snowy/noisy picture
Make sure the TV is fine tuned.
during playback
Head cleaning may be required.
See "MAINTENANCE"
section.
Some snow or streaks are normal during visual
search, still and slow playback.
Timer recording not
VTR should be turned off to activate timer recording.
made
Programmes entered incorrectly.
Clock was not set correctly.
Programme exceeded cassette length.
No cassette or cassette's record safety tab removed.
Cassette stops before
Counter memory has operated.
(Tape stops at
being completely
'0:00:00"' if time counter is on.)
rewound
Clock shows
©
Power interrupted.
Poor/no picture in
©
Carefully check aeriat connection.
normal TV viewing
The indication of the
¢
Push the reset switch using a
no button can be
Then set the information again.
Werbung
