Hitachi VT-M210E Serie Bedienungsanleitung Seite 10

vz - 84
@ ENDLESS PLAY [0] or [—]
*1* ¢PROGRAMME REVIEW
* 2° ¢CHANNEL PRESET
3° #LANGUACE
4° eDEMD
Spy *5' e050 (0
Press 7 —_> PSERDLESS LAY &
to select eek 4
3
'EMUTE CODE )
"MENU ¢END
{0}: You can play the tape from the
beginning to the end repeatedly.
While in the endless play, you can
perform still play, frame advance
and visual search operations,
however, this does not mean
switching off the endless play
feature.
To switch off the endless play, you
must select [—] with this display.
[—]: The endless play feature is
switched off.
M@ REMOTE CODE [1] or [2]
(0)
*5' 405)
*BeKENTAL PLAY
eegger 1 5 ) #HENTAL ~
Press "8" 4 Baspi gum
to select *MENU' END
This display lets you control your VTR
with the ''1'' or "'2'' position of the VTR
1/VTR 2/TV switch on the remote
control unit.
This is convenient when you want to add
another Hitachi VTR to your system, and
control both VTRs with the same remote
control unit.
The "VTR 1" position of the VTR 1/
VTR 2/TV switch on the remote control
will control the VTR you named [1]. with
this display, and the "VTR 2" position
will control the VTR you named [2] with
' this display.
[1]: Your VTR will respond to the "VTR
1" position on the remote control.
[2]: Your VTR will respond to the "VTR
2" position on the remote control.
Note: The VTR will only respond to the
remote code setting ([1} or [2]) you have
selected. !f you select {2] display, you
must set the VTR 1/VTR 2/TV switch on
the remote control to the "VTR 2"
position before the VTR will respond to
the remote control.