Kärcher GSH 18-20 Battery Bedienungsanleitung Seite 17

Wear non-slip, sturdy gloves when work-
ing with the device.
Danger due to flung objects. Keep spec-
tators, especially children and pets, at
least 15 m away from the work area.
Do not subject the device to rain or moist
conditions.
Danger; the cutting tool runs on when the
motor is switched off.
The guaranteed sound pressure level
specified on the label is 89 dB.
89
Device description
The maximum amount of equipment is described in
these operating instructions. Depending on the model
used, there are differences in the scope of delivery (see
packaging).
See graphics page for illustrations
Illustration A
Shrub blade blade guard
1
Shrub blade cutting blade
2
Grass shears blade guard
3
Grass shears cutting blade
4
Trigger lockout button
5
Handle
6
Battery pack unlocking button
7
Trigger
8
Cutting blade mounting button
9
Cutting blade mount
10
*Charger
11
*Rechargeable battery pack
12
* optional
Rechargeable battery pack
The device can be operated with a 18V Kärcher Battery
Power battery pack.
Installation
Installing the cutting blade
CAUTION
Risk of injury from sharp blades
Wear safety goggles and protective gloves when work-
ing on the device.
Illustration D
1. Install the cutting blade.
a Undo the cutting blade mounting button.
b Take off the cutting blade mounting button.
c Put the cutting blade of the grass or shrub shears
onto the cutting blade mount.
d Put on the cutting blade mounting button.
e Tighten the cutting blade mounting button.
Installing the blade guard
CAUTION
Risk of injury from sharp blades
Wear safety goggles and protective gloves when work-
ing on the device.
Illustration B
1. Slide the blade guard over the blade.
Installing the battery pack
1. Push the battery pack into the mounting on the de-
vice.
Illustration E
Trimming the grass with the grass shears
CAUTION
Risk of injury from sharp blades
Wear safety goggles and protective gloves when work-
ing on the device.
CAUTION
Obstacles in the mowing area
Risk of injury and damage
Before starting mowing, check the work area for objects
that may be flung away, e.g. wires, stones, cords or
glass.
1. Remove the blade guard.
2. Switch the device on.
Illustration F
a Pull the trigger lockout button backward to the
end.
b Press the trigger.
The device starts up.
3. Guide the cutting blade parallel to the ground.
Illustration G
Trimming hedges / shrubs with the shrub
CAUTION
Risk of injury from sharp blades
Wear safety goggles and protective gloves when work-
ing on the device.
CAUTION
Obstacles in the mowing area
Risk of injury and damage
Before starting mowing, check the work area for objects
that may be flung away, e.g. wires, stones, cords or
glass.
1. Switch the device on.
Illustration F
a Pull the trigger lockout button backward to the
end.
b Press the trigger.
The device starts up.
2. Guide the cutting blade parallel to the hedge.
Illustration H
English
Operation
shears
17