Troubleshooting; Technical Data - VOLTCRAFT VC-520 Bedienungsanleitung

Troubleshooting

In purchasing this measuring unit, you have acquired a product which has
been designed to the state of the art and is operationally reliable.
Nevertheless, problems or faults may occur.
Only an authorised expert may perform repairs.
If you have queries about handling the measuring device, our techni-
cal support is available under the following telephone number:
Voltcraft®, 92242 Hirschau, Lindenweg 15,
Phone 0180 / 586 582 7

Technical data

Display
Measuring frequency
Measuring impedance
Operating voltage
Working conditions
Operating altitude
Storage conditions
Weight
Dimensions (LxWxH)
Clamp meter sensor max. opening 30 mm
Over-voltage category
Measurement tolerances
Statement of accuracy in ± (% of reading + display error in counts (= number of
smallest points)). The accuracy is valid for one year at a temperature of +23°C ±
5°C, and at a relative humidity of less than 75 %, non-condensing.
4000 counts
approx. 2 measuring operations/second
>10MΩ (V range)
2 x 1.5 V batteries
5°C to 40°C; max 80% RH
max. 2,000 m
-20°C to +60°C; max 80% RH
ca. 205 g
200 x 66 x 37 (mm)
CAT III 600 V
47