Disk Size; Ø 125 Mm; Joining Thread M; Installation And Setting - Meister WS750-125M Originalbetriebsanleitung

be operated. Children should be super-
vised to ensure that they do not play with
the device.
Safety symbols
The symbols on the housing have the
following meanings:
Do not dispose of with
domestic waste!
Important! Observe operating
instructions!
Wear goggles.
Use ear defenders
Wear a dust protection mask.
Always operate with two
hands
Protective cover not for cut-
off operations
„Tested Safety" voluntary
quality mark
ID 1111258118
Housing is double insulated
CE Mark (conformity to Euro-
pean safety standards)

Joining thread M14

Disk size 125 mm
Ø 125 mm
BJ Year of construction
64
SN: Serial number
5405130-Winkelschleifer-man.indd 64 5405130-Winkelschleifer-man.indd 64
SN: XXXXX The first two underlined
numbers give the month of
manufacture.
7 – Installation and setting
Disk guard
The position of the disc cover (3) can
be adapted to suit the relevant working
conditions. To do this, loosen the
screw (11) with a screwdriver and turn
the cover to the new position. Tighten
the screw back up again (fig. 3).
The open disc cover included in the
scope of delivery for this item is designed
solely for use with grinding discs.
CAUTION! The closed part of the
disk guard should always point
towards the user to protect him from
sparks and chippings.
Separating work must be carried out
with a protective mechanism designed
specifically for the purpose.
Mounting and removing the disc cover
Change the disc cover according to
requirement and usage. To do this, loos-
en the screw (11) until the cover can be
removed by rotating it out of the guide
groove of the grinding head.
To mount the disc cover, follow instruc-
tions in reverse order.
Mounting tools
CAUTION! Before working on the
machine, always pull out the
power plug!
30.08.22 06:59 30.08.22 06:59