Working With The Device - hillvert HT-FORBES-600 Bedienungsanleitung

• Place the machine on a level, horizontal surface.
The fuel tank is located on the top of the unit.
•
• Unscrew the fuel filler cap (with the dispenser icon). Do not pull out
the strainer filter inside the opening!
Refill fuel through the plug opening - the maximum fuel level in the
•
tank should not exceed the upper limit of the red level gauge in the
strainer filter, i.a. reach the bottom of the filler neck (see picture
above).
3.3.

Working with the device

3.3.1 Startup
• Set the fuel valve - the icon of the distributor - to the "ON" position so that
the fuel can flow from the tank to the carburetor to start the engine.
Only when the engine is cold: activate the choke, i.e. Set the choke lever
•
to the closed position ("CHOKE" or "CLOSE," depending on the type of
engine) - see the universal icon.
• The throttle lever (on the engine or the steering wheel) - engine speed
control - set to the position approx. 1/3 of the scale in the direction of fast
rotation.
NOTE: the rabbit icon symbolizes fast rotation and the turtle is for slow
speeds, so by moving the lever towards the appropriate icon, you increase
or decrease the engine speed.