Reset Commands; Device Functions And Master Gateway - Balluff BOS R254K-UUI-LK10-S4 Konfigurationsanleitung

BOS R254K-UUI-LK10-S4
Photoelectric Sensors
2
IO-Link Basic Knowledge (continued)
2.10

Reset Commands

The device offers various reset functions. A corresponding
command is executed via a system command.
The behavior and the values that are reset in a given case
can be found in the ISDU overview (see section 3.4 on
page 16) and in the individual function descriptions.
The Reset Commands are described on page 96.
2.11

Device Functions and Master Gateway

The functions of the device are described in detail in the
subsequent sections. Refer to the guide of the IO-Link
master for information on the implementation of the
process, parameter and diagnostic data via the master
gateway.
8 english