Scale Bases; Options; Discrete I/O - Mettler Toledo IND570 Installationshandbuch

The main board also contains an input from the AC (or DC) power supply, front panel keyboard
interface, and bus connectors for the option boards.
1.7.

Scale Bases

The IND570 supports two types of scales: Analog or IDNet.
1.7.1.1. Analog Load Cell Scale
The IND570 main PCB includes an analog load cell interface. The terminal can drive up to twelve
350-ohm analog load cells.
1.7.1.2. IDNet
The IND570 supports an IDNet scale through a PCB interface that connects to a unique bus on the
main board. This interface supports the newer T-brick style of high-precision base through the IDNet
scale card. The port provides the +12 volts and communication required to operate this newer style
base. The interface also supports M-Cell and Point-ADC. The older K module and Pik-brick cells
require +32 volts and are not supported by the IND570.
1.8.

Options

The following hardware and software options are available for the IND570:
·
·
·
·
·
·
·
·
·
·
1.8.1.

Discrete I/O

The discrete I/O interface options include both internal and remote I/O. Only one internal discrete I/O
can be used at a time.
1-10 METTLER TOLEDO IND570 Weighing Terminal Installation Manual
ä
Scale Base
Discrete I/O
- Internal, high-level discrete I/O
- Remote discrete I/O via ARM100 module
COM2/COM3 Serial Ports
Ethernet TCP/IP Port
Programmable Logic Control (PLC) interfaces, including:
· Analog Output
â
·
PROFIBUS DP
Fill-570 application software
Drive-570 application software
COM-570 application software
TaskExpert™ custom application development software
Various brackets for wall and column mounting of the harsh enclosure
ä
InSite SL Configuration Tool (PC based software for backup and restore)
· DeviceNet™
· EtherNet/IP™
· Modbus TCP
· ControlNet™
30205319 | 00| 11/2014