osann Hero360 SL Bedienungsanleitung Seite 23

Support leg for size class 40 - 105 cm
• Fold out the support leg underneath the child
car seat. For children under 105 cm in height,
the child car seat may only be used with the
Isofi x support leg folded out together with the
Isofi x connectors.
• Pull up the support leg height adjustment knob
and extend the telescopic support leg. Make
sure that this is fully in contact with the foot-
well of your vehicle.
• Ensure that the indicator on the support leg is
showing green.
Isofi x connectors
• Push the insertion aids through the slot in the
cushion of the car seat between the backrest
and seat into the Isofi x anchor points.
• When doing this, the fl at side of the insertion
aids must be facing downwards. This step is
not necessary if the vehicle already has fi xed
insertion aids.
• Press the two side Isofi x connector buttons to
extend the length of the Isofi x connectors.
• Push the Isofi x connectors into the insertion
aids until you hear them click into place.
• Push the child car seat in until it rests securely
against the backrest of the vehicle seat. En-
sure that both Isofi x indicators have turned
green.
- 23 -
EN