Steam Ironing; Ironing With Steam Blast; Putting The Steam Iron Down; After Use - Silvercrest SDBB 2400 A1 Bedienungsanleitung

■ The control lamp
temperature is reached, the control lamp
■ To moisten the laundry, press the spray button
for very dry and very crumpled garments.

Steam ironing

NOTE
► The temperature control
wise, no steam will be produced.
■ Set the steam control
= maximum steam).

Ironing with steam blast

NOTE
► The temperature control
Otherwise, no steam will be produced.
To generate the maximum quantity of steam, the steam control
set to the highest level
► The steam blast function is ideal for smoothing difficult-to-reach parts of a
garment.
1) Raise the steam iron slightly.
2) For a steam blast, press the steam blast button

Putting the steam iron down

WARNING! RISK OF FIRE!
► Never leave a hot steam iron unattended if it is switched on or connected to
the mains power supply.
1) Set the temperature control
2) Stand the steam iron only on its base

After use

1) Set the temperature control
2) Remove the plug from the mains power socket.
3) Stand the steam iron on its base
4) Empty the water tank via the filling opening
(see section Cleaning the housing and soleplate).
5) Place the steam iron back on its base
■ 10 │ GB │ IE
7
flashes while the appliance heats up. As soon as the set
6
must be set to at least the
3
to the desired steam setting (
6
must be set to at least the
.
6
to the min setting.
9
6
to the min setting.
9
and allow it to cool down completely.
9
7
lights up.
5
. This function is suitable
setting. Other-
= no steam,
setting.
4
.
.
2
and clean the soleplate
.
SDBB 2400 A1
3
must be
0