Controls - BORETTI PARETE B 90 Gebrauchsanweisung

Controls

A B C D E F
A: Light ON/OFF key: press this touch sensor to switch on or off the lights of the
hood.
B: Motor ON/OFF key (4 speed): press this touch sensor to switch on the hood
extractor fan at the same speed as it was when last switched off. Use the „D" and
„C" keys to vary the speed (power) of extraction.
C: Decrease extraction speed (power) key: press this touch sensor to reduce the
extraction speed of the hood.
D: Increase extraction speed (power) key: press this touch sensor to increase the
extraction speed of the hood.
E: Timer key: irrespective of the extraction speed selected, touching the key will
activate the timer function for 5 minutes (during this phase a dot will flash on and
off on the display). To reset the timer operate the E motor key.
F: Filters reset key: touching this key will reset the metal anti-grease filter (1) sa-
turation and carbon filter replacement (2) warning. (1) After the hood has been
operating for 40 hours, the "FG"or"G" symbol on the display will begin to flash, in-
dicating the need to clean the metal antigrease filters. (2) After the hood has been
operating for 120 hours, the "FC"or"C" symbol on the display will begin to flash,
indicating the need to clean the active carbon filters.
Automatic Sensor: tapping both "C" and "D" keys at the same time will activate the
"Automatic Sensor" function. This function, indicated with an "A" on the display, au-
tomatically sets the hood at the best extraction speed, depending on the cooking
going on. To return to manual operation, press "C" or "D" button.
Note: 4 hours after the last key touch, the fan will automatically turn off.
All hoods with capacities exceeding 650 m3/h have the last timed speed; It lasts
for 7 minutes, after which it automatically returns to the last non-timed speed.
20