GB
Noise and vibration values have been
determined according to the standards and
regulations named in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power equipment to another. The
stated vibration emission value may also be
used for a preliminary exposure assessment.
Warning: The vibration emission
value may differ during actual use
of the power equipment from the stated
value depending on the manner in which
the power equipment is used.
Safety precautions aimed at protecting
the user should be based on estimated ex-
posure under actual usage conditions (all
parts of the operating cycle are to be con-
sidered, including, for example, times dur-
ing which the power equipment is turned
off and times when the equipment is turned
on but is running idle).
Safety precautions
This section deals with the basic safety regu-
lations while working with the electric tiller.
Symbols used in the
manual
Warning symbols with
information on damage
and injury prevention
Risk of burns!
Instruction symbols with infor-
mation on preventing damage
Unplug the machine.
22
Wear protective gloves when
carrying out maintenance and
cleaning work on the equip-
ment to avoid injury from cuts
Help symbols with informa-
tion on improving equipment
handling
Symbols on the implement
Caution!
Read the user manual.
Caution! Protect from rain
and damp.
Wear safety gloves.
Wear safety shoes.
Wear safety goggles.
Danger of injury from ob-
jects spinning off! Keep
surrounding persons away
form the hazard area.
Caution! Switch off the
equipment and disconnect
it from the mains before car-
rying out any cleaning or
maintenance work.
Danger from damaged
mains cable! Keep mains
cables away from tines.
Danger of injury from ro-
tating parts. The tines will
continue to rotate after
the equipment has been
switched off. Wait for them
to stop moving.