Microlife BP MAM Wrist Bedienungsanleitung Seite 13

 Do not use this device with other medical electrical (ME) equip-
ment simultaneously. This may cause device malfunction or
measurement inaccuracies.
 Do not use this device in proximity of high frequency (HF) surgical
equipment, magnetic resonance imaging (MRI) equipment, and
computerized tomography (CT) scanners. This may cause device
malfunction and measurement inaccuracies.
 Use and store the device, cuff and parts in temperature and
humidity conditions specified in the «Technical Specifications».
Usage and storage of the device, cuff and parts in conditions
outside ranges given in the «Technical Specifications» may
results in device malfunction and the safety of usage.
 Protect the device and accessories from the following to avoid
damaging the device:
 water, other liquids, and moisture
 extreme temperatures
 impacts and vibrations
 direct sunlight
 contamination and dust
 This device has 2 user settings. Please ensure it is cleaned and
disinfected between users to prevent any cross contamination.
 Stop using this device and cuff and consult with your doctor if you
experience skin irritation or discomfort.
Microlife BP W100 – MAM Wrist
Electromagnetic Compatibility Information
This device is compliant with EN60601-1-2: 2015 Electromagnetic
Disturbances standard.
This device is not certified to be used in vicinity of High Frequency
(HF) medical equipment.
Do not use this device close to strong electromagnetic fields and
portable radio frequency communication devices (for example
microwave oven and mobile devices). Keep a minimum distance of
0.3 m from such devices when using this device.
Device care
Clean the device only with a soft, dry cloth.
Cleaning the cuff
Carefully remove any marks on the cuff with a damp cloth and mild
detergent.
Accuracy test
We recommend this device is tested for accuracy every 2 years or
after mechanical impact (e.g. being dropped). Please contact your
local Microlife-Service to arrange the test (see foreword).
11 EN