CORDLESS DRILL DRIVER
SET 20V PABS 20-Li F7
Introduction
Congratulations on the purchase of your new
appliance. You have chosen a high-quality product.
The operating instructions are part of this product.
They contain important information about safety,
usage and disposal. Before using the product, please
familiarise yourself with all of the operating and
safety instructions. Use the product only as de-
scribed and for the range of applications specified.
Please also pass these operating instructions on to
any future owner.
Intended use
This appliance is designed for screwing and drilling
into wood, plastic and metal. The appliance may
only be used as described and for the specified
application areas. Any other usage of or modifica-
tion to the appliance is deemed to be improper
and carries a significant risk of accidents.
The manufacturer accepts no responsibility for
damage caused by incorrect use of the appliance.
This appliance is not intended for commercial use.
Features
1 Speed selector switch
2 Bit holder (magnetic)
3 Rotation direction switch/lock
4 ON/OFF switch/speed control
5 Belt clip
6 Battery charge level button
7 Battery display LED
8 Battery pack (2x)
9 Battery pack release button
0 LED work light
■
2
│
GB │ IE
q Chuck
w Torque preselection ring
e High-speed charger
r Red charge control LED
t Green charge control LED
z Replacement lead for pencil
u Cutter knife
i Tape measure
o Centre punch
p Countersink
Socket wrench set
20a
a 75 mm bits
s 50 mm bits
d Metal drill set
f Bit holder
g 25 mm bits
h Wood drill set
j Carpenter's pencil
Package contents
1 cordless drill driver 20V
1 high-speed battery charger
2 battery packs
1 bit holder
20 bits (25 mm)
10 bits (50 mm)
10 bits (75 mm)
1 cutter knife
1 carpenter's pencil incl. 2 spare leads
1 tape measure (5 m)
8 socket wrench set
1 countersink
1 centre punch
Set of 5 wood drills
Set of 14 metal drills
1 carrying case
1 set of operating instructions
PABS 20-Li F7