Malfunction Messages Appearing On The Display - KitchenAid Vertigo Bedienungsanleitung

11. TROUBLESHOOTING GUIDE

11.2 Malfunction messages appearing on the display

Display message
Power Failure!!
Upper unit open
Lower unit open
Replace filter
Upper unit too warm
Upper unit too cold
Fresco too warm
Fresco too cold
Lower unit too warm
Lower unit too cold
Error Code...
Check condenser
> In case of anomalities, touch the button Alarm
error number code.
>
The message will be shown for 3 seconds, then it will go back to the home screen.
> For blocking the message on the screen, press on the display, the button info
the screen for 30 seconds, then it will go back to the home screen.
> In the case there is more than one error message, the dispay will show in time sequence the different
anomalies messages.
44
Malfunction description
Prolonged interruption of electrical power
the appliance resumes work automatically, the display shows the warmest
temperatures achieved
Fridge door open
the message appears after few minutes from the door opening
Freezer door open
the message appears after few minutes from the door opening
Replace filter cartridge
message appears when only 30% of filter capacity is left
Fridge too warm
see Troubleshooting Guide
Fridge too cold
wait for 12 hours: if malfunction persists call Customer Care for advice
Fresco Compartment too warm
see Troubleshooting Guide
Fresco Compartment too cold
wait for 12 hours: if malfunction persists call Customer Care for advice
Freezer too warm
see Troubleshooting Guide
Freezer too cold
wait for 12 hours: if malfunction persists call Customer Care for advice
Functional problems
call Customer Care who may help you to salve the problem or put you in
contact with the nearest Service Agent
Check Condenser
Every 6 months the display shows the message "Check Cond", clean the
condenser and press for 5 seconds the Enter
and the display will show the anomaly message with its
button to reset.
Modalità
( ). The message will be on
Bottle Cooler
On O