Christopeit Sport ET6 Montage- Und Bedienungsanleitung Seite 17

STEP 4
Attach the handlebar post (4) at mainframe (1).
1. Remove the pre-assembled 6 allen head bolt (17), 4
washers (19), 2 washers (41) and 6 spring washers (18) from
main frame (1).
2. Attach the front post (4) to the front post mounting tube of
main frame(1) and connect the plug of control cable (21) to
the socket of the connection cable (22).
3. Insert the front post (4) to main frame (1) and secure,
using 6 allen headbolts (17), 6 spring washers (18), 2
washers (41) and 4 washers (19).
STEP 5
Attach the computer (8) and the handlebar (5) at
handlebar post (4).
1. Remove the screws (26) from the computer cover
(23A+23B). Guide the handlebar (5) to the open handlebar
mount on the handlebar post (4) and close it over the
handlebar (5). Push the front computer cover (23A) over
the handlebar mount and screw the handlebar (5) to the
handlebar post (4) using the L-shaped knob (25) and washer
(19).
2. Guide the pulse cable (28) inwards through the opening
on the side of the handlebar post (4) and then out upwards.
3. Take the computer (8) and remove the screws (27) on
the back of the computer. Guide the computer (8) to the
handlebar post (4) and plug the connecting cable (22) into the
back of the computer (8). Plug the pulse cable (28) into the
socket (8a) on the computer.
4. Screw the computer (8) to the computer holder of the
handlebar handlebar post (4) using the screws (27) without
squeezing a cable.
5. Then secure the computer cover (23A) with the screw
(24). Also tighten the rear computer cover (23B) using the
screws (24+26).
STEP 6
Connection of the power adapter (40).
1. Insert the plug of the AC adapter (40) into the
corresponding socket (86) at the rear end of the product.
2. Then plug the AC adapter (40) into a properly installed
socket (230V~50Hz).
CHECKS
1. Check the correct installation and function of all screwed
and plug connections. Installation is thereby complete.
2. When everything is in order, familiarize yourself with the
machine at a low resistance setting and make your individual
adjustments.
Note:
Please keep the tool set and the instructions in a safe place
as these may be required for repairs or spare parts orders
becoming necessary later.
5
28
25
40
86
17
89
4
41
18
22
17
21
18
17
19
1
8
22
8a
27
23A
42
24
23B
19
24
4
89
GB
26